How to care for and maintain a ping pong paddle

　　Ping pong paddle manufacturers tell you to avoid high temperatures. The elastomer and plastic of the ping pong paddle are prone to aging when heated, which can reduce viscosity and elasticity, commonly known as "dead". The paddle can also deform when heated, affecting the accuracy of the ball. At the same time, avoid contact between the elastomer and plastic with gasoline. Once in contact with gasoline, plastic products will deform and deteriorate, which requires special attention. Ping pong paddle manufacturers tell you that since our country's elastomer is an expanded material, during operation and management, it should not be subjected to excessive traction or pressure. Play at relatively low temperatures and ensure students keep it properly warm. The ambient temperature at the bottom affects the elasticity of the elastomer. When operating with a plastic and elastomer board, use a fire-heated electric iron head to melt the glue between the plastic and elastomer fully when replacing the plastic, to prevent damage to the elastomer caused by plastic replacement. The glue can create economic foam effects for the elastomer, increasing income elasticity, but when bonding to the baseboard, use safe special glue. This type of glue can effectively protect the ecological elastomer and improve the protection of the baseboard.
　　Ping pong paddle manufacturers tell you not to casually wipe, touch, or squeeze the paddle. If your hitting technique is correct, the paddle will not hit the table. When the paddle is not in use, place it on a dedicated paddle cover and cover it with a wooden or plastic flat board to minimize the impact of external forces on the paddle.
　　Keep the outer layer of the paddle clean. At this time, you can gently wipe it with a clean plastic cloth dipped in water. After each match, the paddle should be cleaned with professional elastomer cleaner. Be careful to avoid scratching the plastic outer layer. After use, clean the plastic outer layer stains with a special elastomer cleaner, and after it is dry, apply a special protective plastic film for ping pong. The gel must be stored when the surface is dry. The paddle should be stored in a dry, ventilated place, away from heat sources, avoid sunlight exposure, and should not be stacked on top of other paddles. Ping pong paddle manufacturers tell you that there are many types of plastics in ping pong equipment, but generally, they can be divided into two types: defensive rubber and offensive rubber. Anti-stick agents include anti-stick and anti-arc adhesives, and adhesives include plastic, original glue, and long glue. Due to different amounts of glue used, anti-racket rubber has greater friction, with an outer layer that has an adsorption effect and strong adhesion. The contact point between the plastic and the ball is less likely to slip, which helps increase the ball's spin. To fully utilize this feature, when using reverse rubber, the most important thing is to keep the plastic clean. Do not wipe the plastic with oily hands. After each match, the plastic can be cleaned with water and coated with a plastic film; if there is any dirt that is not easy to clean with water, detergents such as soap can be used and then dried before use.
　　This tape adhesive has low content, high hardness, low friction, small area, and is easy to slide. Based on these characteristics, special attention should be paid when operating gelatin to keep the surface dry. If playing in a humid place, you can wipe the plastic with a drying agent to reduce moisture on the plastic outer layer. Racket rubber is generally applied on thinner plastic, bonded with elastomer; do not apply too much glue on the plastic to avoid the plastic "rolling" and causing weight loss.

Service:+86-572-5816723
Fax: +86-572-5816487
Email:hzshuguang@vip.163.com
Address: Tianzi Lake Industrial Zone, Anji County, Huzhou City, Zhejiang Province